Cerio CS-1224G-24P-A2 - 24 Port 10/100/1000M Gigabit PoE+ Switch with 2 SFP Ports ( 450Watt Power )

CS-1224G-24P A2

24 Port 10/100/1000M Gigabit PoE+ Switch with 2 SFP Ports  ( 450Watt Power )

CS-1224G-24P PoE Switch is designed for SMB deployment and can also be upgraded to 1U” chassis for standard rack mounting. It is suitable for setting up surveillance systems in small offices, shops, restaurants, and multi-node network environments, etc., providing convenient and reliable network power supply and data transmission. It’s supporting a maximum PoE output budget of 400 Watt shared for 24port of PoE ports and enough to reliably power devices on all ports.Using UTP Cable to transmit network data and power signals to PoE PD devices (such as POE AP, IP CAM, IP Phone, etc.), so you don’t have to worry about the traditional problem of installing a power socket. , easily use PoE to build your network environment.

The CS-1224G-24P is equipped with a built-in PWM hardware chip and a smart controller that can automatically adjust the fan speed based on real-time temperature monitoring. The fan will automatically stop when it is not needed, enabling smart energy saving and extending the fan’s lifespan.

By integrating the data transmitting cable and power cord, it eliminatevou could easily connect Wireless AP or VoIP phone or IP Camera to this switch without looking for power outlets. Over current protection and circuit shorting protection are also supported to ensure product safety.

Highlight Features

• Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3af PoE and IEEE 802.3at PoE+ standards.
• 24port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch, supports 24 Port Gigabit PSE/PoE function and compliant with IEEE 802.3af/at PoE standards.
• Supports 2 Gigabit SFP uplink ports and compliant with IEEE 802.3z 1000Base-SX/LX standards.
• Supporting the power up to 30Watt /15.4Watt /7.5Watt /4Watt for each PSE/PoE port.
• Built-in 450 Watt power supply, supports a maximum PoE output budget of 400 Watt, shared for 24 ports of 10/100/1000M PoE ports.
• Full/Half-Duplex capability on each TX port, Autolearning networking configurations.
• Supports Store & Forward architecture and performs forwarding and filtering.
• Flow control: back pressure for Half-duplex and IEEE 802.3x for Full-duplex mode.
• Support Jumbo Frame 9K.
• Non-blocking & Non-head-of-line blocking full-wire speed forwarding.
• Supports TP interface Auto MDIX function for auto TX/RX swap.
• Automatic Source MAC Address Learning and Aging. Supports up to 8K MAC addresses, Up to 4.1Mbits buffer.
• It supports the system loop detection function, and can detect each port automatically and flash the LED light to display of the port where the loop occursr.

Hardware Overview

CS-1224G-24P Specifications