Cerio CS-2648XG 48 Port 10/100/1000M Gigabit Web Managed Switch with 6 SFP+ 10Gigabit Ports

The CS-2648XG Web Managed Switch is ideal for minimizing network downtime, connecting subnets for improved performance, and enabling the bandwidth demanded for multimedia and imaging applications. The CS-2648XG effectively reduces operational costs by allowing network administrators to remotely access and monitor their network, ultimately eliminating the need for constant on-site maintenance staff. CS-2648XG supports layer 2 web managed design also increases network security by providing enhanced network control through port management and visible MAC table addresses/clients. This device¢â‚¬â„¢s high feature and high performance design, paired with an easy to use web interface, effectively improves both network management and efficiency for medium and large sized applications.  

CS-2648XG is a feature packed web managed gigabit switch, providing enterprise grade function at a competitive price point. Deploying CS-2648XG in your network can provide network organization and improved efficiency for your devices and clients. CERIO¢â‚¬â„¢s web-managed switches offer convenient configuration which ultimately provides premium performance, easy installation, and is sure to meet the increasing demands of growing networks.

Highlight Features

• Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3ae SFP+, IEEE 802.3az EEE standards.
• Supports 48 port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch.
• Supports 6 SFP+ 10Gigabit uplink ports for long-distance network applications.
• Support system overheating or voltage error safety mechanism through LED alarm.
• Full/Half-Duplex capability on each TX port, Auto-learning networking configurations.
• Supports store & forward operation.
• Supporting the flow control: back pressure for Halfduplex and IEEE 802.3x for Full-duplex mode.
• Non-blocking & Non-head-of-line blocking full-wire speed forwarding.
• Supports network interface Auto MDIX function for auto TX/RX swap.
• Automatic Source MAC Address Learning and Aging.
• Provides 12K Jumbo frames to improve network utilization of a large file transfers.
• Supports up to 32K MAC addresses and Up to 16Mb Packet Buffer size.
• Support surge protection 6KV on the RJ45 port to prevent damage to the switch and connected equipment.
• VLAN and IEEE802.1Q tag-base VLAN based on ports & VIDs; add/remove/modify tag.
• Supports Voice VLAN / MAC VLAN / Surveillance VLAN / Protocol VLAN and GVRP.
• Supports Broadcast / multicast / unknown unicast storm control.
• Provides IGMP snooping v1/v2/v3 function and supports MLD snooping and MVR.
• IEEE802.3ad Link Aggregation LACP.
• Supports 802.1x protocol to support CHAP, EAP mode and port/MAC based network access control.
• Supports RADIUS/TACACS+ and AAA Certificate function.
• Supports MAC Table Management.
• Supports MAC/IPv4 and IPv6 ACL security management.
• Supports IPv6 Internet Protocol, IPv6 Auto-configuration mechanism and DHCPv6 Client and other functions to facilitate the setting and management of IP addresses.
• Supports DoS (Denial of Service) Defense for enhanced network security.
• Firewall Dos supports POD, LAND, UDP Blat, TCP Blat, Null /X-Man Scan Attack, TCP SYN-FIN/SYN-RST Attack, Smurf Attack and other defense function.
• Link Layer Discovery Protocol (LLDP) and LLDP-MED.
• Supports Dual Image function, which can shorten the downtime during the switch firmware upgrade or downgrade, and supports Active firmware image, Backup firmware image security backup mechanisms.
• Supports DHCP Snooping function to prevent access by unauthorized hosts and DHCP servers and supports DHCP Option 82 provides additional security.
• Each port supports limiting the number of MAC Addresses with IP and MAC address Binding.
• Supports QoS Quality of Service, Port-based QoS bandwidth management, 802.1q priority Tag based with 8 priority Queues and 8 Weights.
• Supports bandwidth control to set control traffic limits (inflow and outflow) for each port.
• Supports Port Mirroring function.
• Supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP).
• Supports UDLD (Unidirectional link detection), which can monitor the link status and prevent network problems.
• Support proxy DNS server, SNTP time server network time synchronization function, it can automatically adjust the host to update the time, easy to understand the problem and restore.
• Supports Event Log, Alarm Log, Security Log, Network Log, and Protocol Log.
• Supports file backup and recovery.
• Software management service supports setting Console / Telnet / SSH / HTTP /HTTPS/SNMP.
• Supports GUI display for monitoring network data status by port, traffic analysis by port, and device CPU and Memory loading for convenient administrative network analysis and management.
• Supports web-based HTTP web management user interface and supports SNMP v1/v2c/v3.

Hardware Overview 

Jumbo Frames9.6k