Cerio POE-PD04S+ PoE Splitter, 10/100/1000M Multi Gigabit PoE 802.3at Splitter w/ 2.1mm and 2.5mm cables

Higlight Features

• • • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2500 /5000 BASE-T, IEEE 802.3at/af PoE standards.
    • Supports 1/2.5/5Gbps Multi Gigabit Ethernet.
    • The PoE splitter can use to connect non-PoE 802.3at /af compliant devices to PoE injector or PoE switch.
    • Supports Output Voltage hot switching for 12VDC/19VDC/24VDC three range adjustable.
    • In the case of 802.3af/at active PoE configuration,the maximum power output up to 27Watts and in the case of passive PoE configuration, the maximum power output up to 80Watt. (Depends on the power supply from Passive POE PSE power source.)
    • Supports Ethernet PoE to separate to only DC/Power and only Ethernet/Data.
    • Supports power reverse acute protection design, and auto restarts to protect possible short circuit, which can reduce the damage caused by the short circuit.
    • LED indicators for Power function enable and DC output voltage display of 12V/19V/24V.
    • Bundle accessories for inside diameter 2.1 mm (PHY) to 2.1 (PHY) mm DC cable.
    • Supports desktop or wall mounting installation and multiple units combination for easy to bundles
      organize the Ethernet cables.

    Functionality

    CERIO POE-PD04S+ supports an excellent design of hotswitching protection to prevent failures caused by overload, which can effectively prevent failures caused by instantaneous switching of different voltages. The equipment will not cause any damage when the voltage output is changed during operation. It’s more safe and convenient. It provides DC 12V or 19V or 24V needs for any network or non-network equipment through DC to DC Cable which is included with package. Using the Cerio PoE Splitter, you can take advantage of Power Over Ethernet and place Multi Giga/Giga/Fast Ethernet-enabled products, such as Wireless Access Points, Network Cameras, and VoIP Phone where power outlets are not readily available. 

    Long Distance Application

    The PoE Splitter supports Multi Gigabit Ethernet PoE Powered Device. It’s able to split the PoE signal into separate data and power sources up to total 100Meters (328 feet). The Multi Gigabit PoE suggest use a Cat 5e Ethernet cable to meet 100Meters PoE distance.

    ESD Protection

    CERIO POE-PD04S+ supports ESD, Electro Static Discharge protection includes Over Voltage protection and Short Circuit Protection ensuring device safety.

    Additional Benefits

    Some additional benefits of Cerio POE splitter include cost saving, small pocket size and convenience in network planning, and higher reliability.

    Easy installation

    The PoE Splitter is simple Plug-and-Play, requires no configuration.

Product Application

Hardware Overview