- Intel® 12th and 13th Gen Processors up to 65W
- Long-Life Embedded Class with Planned Lifecycle Through Q1'2037
- 1 * PCIe 4.0 x16, 2 * M.2 M-key NVMe, 4 * USB 3.2
- Two 2.5GbE, 1 * M.2 B-key, 1 * M.2 E-key, 6 * COMs
- Supports up to 4 Displays, 2 * HDMI, 2 * DP, LVDS/eDP
- 2 * DDR5-5600 Dual Channel SODIMM up to 64GB
- Supports BIOS Recovery, ECO-design for EuP/ErP

Specification

Model Series	MI215
Part Number	MI215Q6700 MI215Q6702 (Onboard TPM 2.0)	MI215R6800 MI215R6802 (Onboard TPM 2.0)
Form Factor	Mini ITX (170 x 170mm)
Processor	Intel® 12th and 13th Gen Processors up to 65W and IccMax 180A Socket LGA 1700 (Formerly Alder Lake-S and Raptor Lake-S)
Chipset	Intel Q670E	Intel R680E
Memory	2 x Dual Channel Non-ECC DDR5-5600 SODIMM up to 64GB * 12th Gen CPU only supports DDR5-4800 up to 64GB	2 x Dual Channel ECC/Non-ECC DDR5-5600 SODIMM up to 64GB * 12th Gen CPU only supports DDR5-4800 up to 64GB
Graphics	Requires Intel Processor with Graphics or a PCIe Graphics Card
Audio	Realtek ALC888S HD Audio
LAN	1 x Intel I225-V 2.5GbE 1 x Intel I225-LM PCIe 2.5GbE (Support iAMT)
Storage	2 x SATA3 6Gb/s for RAID 0/1 1 x M.2 2242 (SATA & PCIe 4.0 x4 NVMe, M-key) 1 x M.2 2280 (SATA & PCIe 3.0 x4 NVMe, M-key)
Super IO	FINTEK F81966D
TPM	Intel fTPM 2.0 (PTT) Trusted Computing Firmware Onboard NUVOTON TPM v2.0 for MI215Q6702 and MI215R6802
Back Panel Connectors
4 USB 3.2 Gen 2 (10 Gb/s) 2 RJ45 2.5GbE LAN (10/100/1000/2500) 2 HDMI 2.0b (4096 x 2160 @ 60Hz) 2 DP 1.4a (4096 x 2304 @ 60Hz) 1 3.5mm Line-out/MIC-in Jack 1 12V ~ 36V DC-in Jack (4-pin Mini-DIN)
Onboard I/O Connectors
1 PCIe 4.0 x16 Slot (x16 or x8/x8 Bifurcation, Max. 70W) 2 SATA3 6Gb/s Connector for RAID 0/1 1 M.2 M-Key, 2242 (PCIe 4.0 x4 NVMe and SATA) 1 M.2 M-Key, 2280 (PCIe 3.0 x4 NVMe and SATA) 1 M.2 E-key, 2230 (USB2.0 and PCIe 3.0 x1 CNVi WiFi) 1 M.2 B-key, 3042 3052 (USB3.2/2.0 and PCIe 3.0 x1 for Cellular) 1 USB Header for 2 additional USB 3.2 Gen 1 (5 Gb/s) 2 USB Headers for 4 additional USB 2.0 Ports 6 Serial Headers (4 * RS232, 2 * RS232/422/485) 1 Combo 24-bits Dual Channel LVDS or eDP connector (LVDS Max 1920x1080 @60Hz, eDP Max 4096x2304 @60Hz) 1 Nano SIM Socket (on bottom) 1 8 bit GPIO Header 1 AT/ATX Mode Jumper 1 9-pin Front Audio Header 1 5-pin SMBUS Header 1 Fan Header 1 4-pin Alternate Power-in Connector
Power Supply for MI215
External Power Supply – the board can be powered with a +12V ~ +36V external power supply though a DC connector on the back panel. The rear +12V ~ +36V DC jack accepts plugs with a 4-pin Mini-DIN connector. Internal Power Supply – the board can alternatively be powered via the internal +12V ~ +36V DC 2 x 2 power connector, where pins 1 and 2 are +12V ~ +36V (±5%) DC and pins 3 and 4 are GND. The connector used is Molex Micro-Fit (3mm pitch), right-angled, 4-pos/dual row (2x2). Caution: There is no isolation circuitry between the external +12V ~ +36V DC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V ~ +36V DC jack is covered if the internal 2 x 2 power connector is to be used.
Market Segments Supported
√ Edge Computing √ Digital Signage √ Industrial PCs √ Factory Automation √ Public Sector √ Digital Security √ Surveillance Application
Environment
Operating Temperature : 0 ~ 60°C (with 0.7m/s air flow) Storage Temperature : -20 ~ 85°C Humidity: 10% ~ 90% RH @40°C (non-condensing)